OLT LTP-8X rev.C

OLT LTP-8X rev.C

Key features

  • 8хPON ports, 1U case
  • Hot-swappable redundant power units
  • Remote management via CLI, SNMP
  • Compliance with G.988, G.984.x and TR-156 standards
  • Ability to provide cable TV together with data transmission
  • Optimal solution for a small village or an apartment building

Optical Line Terminal (OLT) is designed to provide broadband access over Passive Optical Network (PON).

GPON interfaces are used to connect the optical distribution network (PON). You can connect up to 128 subscriber optical terminals via a single fiber for each interface. Access to the operator’s transport network is provided through 10 Gigabit or combined Gigabit uplink interfaces.

OLT LTP-8X rev.C allow operators to build scalable, fault tolerant “last mile” networks to ensure the highest safety standards. OLT manages subscriber devices, traffic switching and connection to the transport network.

Broadband access using FTTH technology is the highest quality version of the Triple Play service delivery, as it provides high data rates over long distances. The main advantage of PON technology is the lack of electrically powered active nodes within the section from OLT to ONT, which greatly reduces the network operating cost. Furthermore, PON technology saves on cabling infrastructure by reducing the total length of the optical fiber, as only one fiber for a group of up to 128 subscribers is used within the section from the central node to the splitter.

OLT LTP rev.C support 2 hot-swappable redundant power units.

Interfaces

  • Uplink
    • 2 ports of 10GBase-X (SFP+)/1000Base-Х
    • 4 combo ports of 10/100/1000Base-T/ 1000Base-X (SFP)
    • 4 ports of 10/100/1000Base-T
  • Downlink
    • 8 ports of 2,5/1,25 Gbps GPON (SFP)

Port modes

  • Duplex/half-duplex 10/100/1000 Mbps mode for electric ports
  • Duplex 1/10 Gbps for optic ports

SFP PON parameters1

  • Medium –  single-mode optical fiber –  9/125, G.652
  • Splitting ratio – up to 1:128
  • Support for RSSI (Received Signal Strenght Indication)
  • Support for DDM (parameters output in CLI):
  • Digital RSSI
  • Module Temperature
  • Supply Voltage
  • Laser Bias Current
  • Tx Optical Power Output

Class B+

  • Compliance with ITU-T G.984.2, FSAN Class B+, SFF-8472 standards
  • Max. link distance: 20 km
  • Transmitter: 1490nm DFB Laser
    • Data rate: 2488 Mbps
    • Average launch power:  +1,5..+5 dBm
    • Spectral line width: -20 dB 1.0 nm
  • Receiver: 1310nm APD/TIA Detector/Amplifier