The GJFJV(BOC) multi-purpose breakout tight buffer cable uses a single-core (Φ900um tightly sheathed optical fiber, aramid reinforcement) as a sub-unit, with a non-metallic central reinforcement core, the sub-units of the cable are twisted around the central reinforcement core to form the core, and the outer layer is extruded with a layer of polyvinyl chloride (PVC) or low smoke and halogen-free (LSZH, low smoke, halogen-free, flame retardent) sheath.
GJFJZY multi-purpose cabling cable uses multiple Φ900um flame retardant tightly sheathed optical fibres as the optical transmission medium, covered with a layer of aramid as the load-bearing reinforcement unit and sheathed with a layer of polyvinyl chloride (PVC) or low smoke, halogen free material (LSZH, low smoke, halogen free, flame retardent).
The optical fiber(s) is placed in the center.Two parallel steel wires or FRP are placed at the two side. An additional steel wire reinforcement element is attached to the outside of the fibre optic cable.Then the cable is completed with LSZH sheath.
The GYFTA53 fibre optic cable is constructed by placing a 250um fibre optic cable in a high modulus material pine tube, filled with a waterproof compound.
GYTA fibre optic cables are constructed with a 250um fibre optic fibres cable in a high modulus material pine tube, which is filled with a waterproof compound.At the centre of the core is a metal reinforcement core, which for some cores is also extruded with a layer of polyethylene (PE).
The GYTC8S(A) fibre optic cable are constructed by placing a 250um fibre optic cable in a high modulus material pine tube, which is filled with a waterproof compound.
The GYXTW fibre optic cable is constructed by placing 250um fibres in a loose tube made of high modulus plastic.The tubes are filled with a waterresistant filling compound.
MTP trunk cable is cost-effective substitute for field terminal. It is designed for high-density optical fiber wiring in data center, which can save space and reduce cable management problems.
Fiber optic splitter box is the wiring and splitting equipment of user terminal in FTTH system, which is a kind of equipment used for terminating, diverging, wiring and splitting of fiber optic cable and fiber optic fiber; and providing protection and management of fiber optic cable.
The equipment is widely used as a temination point for the cable to connect with drop cable. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTX network building. It can be used for indoor or outdoor.
Fiber optic splitter box is the wiring and splitting equipment of user terminal in FTTH system, which is a kind of equipment used for terminating, diverging, wiring and splitting of fiber optic cable and fiber optic fiber; and providing protection and management of fiber optic cable.
The equipment is widely used as a temination point for the cable to connect with drop cable. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTX network building. It can be used for indoor or outdoor.
The equipment is widely used as a temination point for the cable to connect with drop cable. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTX network building. It can be used for indoor or outdoor.
